Equipment for machine building
Select material or product
Please, specify your industry first
select equipment type
Reset all
Отрасли
ERGA MG lifting magnet
-
Safety factor 3,2
-
All products are tested on a test bench
-
In-plant produced powerful permanent NdFeB magnets
-
Handling flat and round loads
ERGA BSM magnetic drum separator
-
Permanent magnetic system with intensity from 0.08 to 1.0 Т
-
Efficient recovery of magnetic inclusions with size from 300 mm to 0.02 mm
-
Automatic cleaning
-
Operation temperature range from -50°С to +50°С
ERGA SMB magnetic pulley
-
2 in 1: magnetic iron separator + head pulley
-
Magnetic field operation range up to 350 mm
-
No power consumption
-
Automatic cleaning
Zig-Zag air separator (pneumatic separator)
-
Separation/cleaning efficiency up to 99%
-
High throughput
-
Adjustable air flow
-
Low power consumption
ARMAG LS-AB electropermanent (pulse) battery-operated lifting magnet
-
Safety factor min. 4
-
All products are tested on a test bench
-
Integrated protection system eliminates lifter’s switching off under load
-
Up to 1000 on/off switching cycles without battery recharging
ERGA MGU-1, MGU-2 magnetic seals (leak stopper, magnetic patch)
-
Quick elimination of accidental releases and leaks – environmental pollution reduction
-
Reliable tool in trainings and real emergency situations
-
Easy installation and operation
-
Powerful permanent magnetic system
ARMAG LT magnetic beam for sheet metal
-
Lifting single plate from a stack
-
Prevention of cargo deformation
-
Load handling safety
-
Energy efficiency
ERGUARD DCM conveyor dismountable metal detector
-
Sectional casing
-
Easy installation
-
High sensitivity to metal inclusions
-
Protection of expensive equipment from damage and premature wear
ERGA SMBM magnetic drum separator
-
Permanent magnetic system with intensity from 0.08 to 1.0 Т
-
Efficient recovery of magnetic inclusions with size from 150 mm to 0.02 mm
-
Dust protection
-
Availability of all settings necessary for operation
ARMAG LS magnetic beam for plate metal
-
Lifting single plate from a stack
-
Prevention of cargo deformation
-
Load handling safety
-
Compact remote control
ARMAG LK magnetic lifting beam for plate metal turning
-
Lifting single plate from a stack
-
Prevention of cargo deformation
-
Load handling safety
-
Energy efficiency
ARMAG RM magnetic beam for operation with plate metal cutting
-
Lifting single plate from a stack
-
Prevention of cargo deformation
-
Load handling safety
-
Energy efficiency