Pneumatic transport separators with automatic cleaning. ASMK series

Pneumatic transport separators with automatic cleaning. ASMK series

Designation

ASMK magnetic separator is designed for inline automatic cleaning of directed flow of various bulk and granulated materials from ferromagnetic contaminants.

Installation

ASMK rod systems are usually used when there is a possibility of installing new equipment in an existing process line with structural modifications of the product transportation scheme. Magnetic separator of ASMK series is installed in vertical pipelines, chutes and bulk discharge outlets.

Operation principle

ASMK separators are based on the principle of ferromagnetic tramp recovery with NdFeB magnetic rods.

The double-row system of stainless steel rods is the main operating part. The separator is designed as a stainless steel casing containing the product separation area, the ferromagnetic contaminants discharge area and electro-pneumatics area, as well as the guides, which support the separator’s working elements and ensure their horizontal movement. To achieve maximum separation efficiency and optimum distribution of the product as it passes through the magnetic separator the grids above the magnetic system (MS) casings are provided. They also prevent short-circuiting of MS casings from ferromagnetic tramp with a small cross section and length over 25 mm (wires, electrodes, etc.). A special compartment for electro-pneumatic equipment, connected with the remote control panel and performing the preparation and distribution of compressed air, is located in the rear part of the casing. The main remote control element is a versatile timer, which allows to set the optimum operation mode, i.e., to set the time interval between the processes of cleaning the MS casings from the ferromagnetic bodies extracted from the product.

Application

ASMK separators are used for technological process automation or for increased content of ferromagnetic contaminants in the product. These separators can also be used when there is no access to the rod-type magnetic separators for their regular manual cleaning.

Technical characteristics

  1. Separated product fraction – 0.01 to 3 mm;
  2. Separated material moisture - up to 3%;
  3. Capacity- from 0.010 to 100 t/h;
  4. Magnetic system material - Nd-Fe-B, (BH) max > 310 kJ/m3;
  5. Magnetic induction on the surface of magnetic blocks, at t=20(°С), 350 - 700 (mTl);
  6. Maximum operating temperature - +80°С (+100°С);
  7. Cleaning system - automatic ( combined);
  8. Stability of magnetic properties for min. 10 years.

Technical parameters can be changed upon customer’s request. The separators are fire-proof machines, thus can be used in severe conditions that require strict compliance with safety standards. If you have difficulties with the choice of equipment or cannot find a suitable separator among the products presented, you can place an inquiry for the separator that meets your requirements.

Model * Dimensions, mm Magnetic induction, mT Weight, kg
ASMK 300х300 1540х670х600 100-400 150
ASMK 400х400 1540х660х600 100-400 170
ASMK 500х500 1540х670х600 100-400 200
Ask a question
Leave your contact details and we will contact you
Additional information:
Branch application equipment:
Separation / detection product:
Нажимая на кнопку "Отправить", вы принимаете условия Cоглашения об использовании сайта