ERGUARD SCM conveyor metal detector with permanent magnets
Industrial metal detector with permanent magnets for detection of magnetic metal inclusions in nonmagnetic metal flow transported by belt conveyor
-
State-of-the-art permanent magnet development
-
High sensitivity to metal inclusions
-
99% efficiency in detection of magnetic impurities
-
Nonferrous metal scrap quality control
-
IP rating of product/sensors: IP54/IP65
-
Automatic self-diagnostic system
-
Remote control panel
-
High tolerance to vibrations
-
Touch Screen intuitive control
-
Visual and sound alarm
-
Certificate of conformity to requirements of (technical regulations of the Customs Union) TR CU
Operation Principle

Industries
Specialized ERGUARD SCM single-plate metal detector with permanent magnets is commonly applied in scrap processing facilities to control the quality/composition of nonferrous (nonmagnetic) metal scrap with up to 99% efficiency of magnetic impurities detection.
- Compact solution
ERGUARD SCM metal detector is easily integrated under conveyor belt without any belt splitting. As extended option the detector can be delivered with conveyor and without any process line reworks. It takes only a couple of hours to install the equipment.
- High sensitivity to magnetic metals
ERGUARD SCM single plate metal detector with permanent magnets provides maximum sensitivity in detecting inclusions of magnetic metals of various mass:
- from 5 g at height of 100 mm from the detector plate
- from 10 g at height of 200 mm from the detector plate
When metal inclusions are detected, the metal detector emits a sound / light signal and optionally stops the conveyor and diverts the contaminated product from the belt using a rejection device.
The sensor has ambient class NF4 design (ambient temperature - 60 / + 40 °С), which allows working in a wide temperature range.
- Nonferrous metal scrap quality control
ERGUARD SCM permanent magnet metal detectors are applied as inspection equipment for thorough safety inspection of nonferrous scrap quality/composition, eliminating magnetic impurities and magnetic metal alloys. The output is high grade clean product suitable for further melting or sale at attractive prices.
- Touch Screen intuitive control
The control panel is a 7-inch high-definition touch screen with user-friendly interface: 3 levels of access to settings (operator, engineer, service specialist) are provided to prevent unauthorized access.
- Storing up to 10 materials in memory
Individual settings for specific material/product are stored in the system memory, designed for 10 items.
- Conformity with technical regulations of the Customs Union
The equipment corresponds to requirements of technical regulations of the Customs Union TR CU 004/2011 “On Safety of low-voltage equipment” and TR CU 020/2011 “Electromagnetic compatibility of technical equipment”. All required certificates are included in the scope of supply.
- Have difficulties choosing or haven’t found what you are looking for?
Please, fill in the questionnaire on our site and we will select the most suitable solution to you.
ERGUARD SCM conveyor metal detector with permanent magnets are engineered and manufactured according to customer’s order technical requirements.
You can optionally order a set of spare parts to ensure continuous operation of the equipment in extended configuration with a built-in conveyor and a rejection unit:
- belt
- bearings
For this type of equipment there is an option of integrating REMOS remote monitoring system, providing monitoring of the metal detector status in real time. Available options:
- Access to complete information about operation of the machine (operation / idle, operating modes, error decoding, position of magnetic rods, cleaning period)
- Power supply sensor
- Incoming switch and contactors position control sensor
- Equipment downtime monitoring
- Door status control (open / closed)
- Shock / vibration sensor
- Humidity sensor
- Temperature sensor