Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA —
Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA — Research and Production Company ERGA —

Operation Principle

Industries

ERGUARD CM conveyor non-dismountable metal detector protects sawing, bark-stripping and other types of process machinery from equipment damage caused by foreign metal objects.

  • Stainless steel casing

Casing of ERGUARD CM metal detector for wood processing plants is made as all-welded stainless steel construction- durable and not corrodible. Detection area section represents an octahedron and its dimensions are set depending on the required diameter of logs.

Extended package of CM metal detector is supplied complete with an integrated conveyor, which is installed in the timber feed line between chain conveyors. The installation takes only a few hours.

  • High sensitivity to metal inclusions

ERGUARD CM metal detector for wood processing plants provides maximum sensitivity in detecting inclusions of magnetic metals ≥ 2.0 mm, nonmagnetic metals ≥ 4.0 mm. High sensitivity allows for detector setup to protect equipment from wear and eliminate false rejects and line stoppage.

When metal inclusions are detected, the metal detector emits a sound / light signal and depending on selected option stops the conveyor or labels the contaminated product.

The sensor has ambient class NF4 design (ambient temperature - 60 / + 40 °С), which allows working in a wide temperature range.

  • Protection of process equipment from damage and premature wear

ERGUARD CM conveyor metal detector for wood processing industry reduces wear, prevents damage and downtime of crushing and size reduction equipment and eliminates resulting financial losses.

  • Touch Screen intuitive control

The control panel is a 7-inch high-definition touch screen with user-friendly interface: 3 levels of access to settings (operator, engineer, service specialist) are provided to prevent unauthorized access .

  • Conformity with technical regulations of the Customs Union

The equipment corresponds to requirements of technical regulations of the Customs Union TR CU 004/2011 “On Safety of low-voltage equipment” and TR CU 020/2011 “Electromagnetic compatibility of technical equipment”. All required certificates are included in the scope of supply.

  • Have difficulties choosing or haven’t found what you are looking for?

Please, fill in the questionnaire on our site and we will select the most suitable solution to you.

Series-produced models of ERGUARD CM conveyor non-dismountable metal detectors are given in the table. Tailored solutions can be designed according to the order requirements.
Model Dimensions (LхWхH), mm Max. power consumption, W Weight, kg
ERGUARD CM for wood processing plants 900 1560х700х1350 150 330
ERGUARD CM for wood processing plants 1200 1850х900х1705 150 380
You can optionally order a set of spare parts to ensure continuous operation of the equipment in extended configuration with a built-in conveyor and a rejection unit
  • belt
  • bearings
For this type of equipment there is an option of integrating REMOS remote monitoring system, providing monitoring of the separator status in real time. Available options:
  • Access to complete information about operation of the machine (operation / idle, operating modes, error decoding, position of magnetic rods, cleaning period)
  • Power supply sensor
  • Incoming switch and contactors position control sensor
  • Equipment downtime monitoring
  • Door status control (open / closed)
  • Shock / vibration sensor
  • Humidity sensor
  • Temperature sensor

1

PRODUCT CHARACTERISTICS

Please, fill in the field correctly
For bulk products
Please, fill in the field correctly
Please, fill in the field correctly
For pieced products
Please, fill in the field correctly
Please, fill in the field correctly
Please, fill in the field correctly
Please, fill in the field correctly
Packing
Please, fill in the field correctly

2

CHARACTERISTICS OF METAL INCLUSIONS

Please, fill in the field correctly
Please, fill in the field correctly

Product feeding methods

Material feed
Please, fill in the field correctly
For belt conveyors
Please, fill in the field correctly
Please, fill in the field correctly
Belt shape
Belt contains metal elements (cord, rivets, etc.)
Please, fill in the field correctly

METAL DETECTOR INSTALLATION SITE

Please, fill in the field correctly
Please, fill in the field correctly

3

REQUIREMENTS TO METAL DETECTOR

Please, fill in the field correctly
Please, fill in the field correctly
Type of response

4

Contact Information

Please, fill in the field correctly
Please, fill in the field correctly
Please, fill in the field correctly
Please, fill in the field correctly
Please, fill in the field correctly
Please, fill in the field correctly

We received the questionnaire
and will contact you after its processing.

Research and Production Company "ERGA" — Established in 1991 — Research and Production Company "ERGA" — Established in 1991 — Research and Production Company "ERGA" — Established in 1991 — Research and Production Company "ERGA" —

Any questions?

Please, fill in the field correctly
Please, fill in the field correctly
Please, fill in the field correctly
Please, fill in the field correctly

Any questions?

We have accepted your request and will process it as soon as we can.