ERGA MG lifting magnet
Compact permanent lifting magnet with manual start for handling carbon steel rolled stock
Operation Principle
Industries
ERGA MG lifting magnet with manual control for handling carbon steel rolled load up to 5000 kg.
- All products are tested on test bench: confirmed guarantee of efficient operation
All ERGA MG lifting magnets are thoroughly tested on the test bench, which guarantees high degree of equipment reliability and its strict compliance with the declared technical characteristics. Products with safety factor 3.2 * are allowed for shipment*.
* Ratio of pull-off force to nominal load capacity
- In-plant produced powerful permanent NdFeB magnets
ERGA MG lifting magnet design is based on powerful permanent NdFeB magnets of ERGA's own production. ERGA MG lifting magnet holds load over 100 times heavier than its own weight. Geometry of the lifting magnet face ensures handling both flat and round loads.
- No power consumption
ERGA MG lifting magnet does not need any electric power for magnetic field generation and differs from electromagnetic analogs in significantly greater reliability. The guaranteed service life of magnetic system properties, subject to operating rules, is 10 years.
- Easy operation
After putting the lifting magnet on the load just switch the lever on, thereby activating the magnetic field. The lever lock prevents any risk of accidental disconnection. Reliability of the construction is confirmed by many years of experience in deliveries without any returns and claims.
- Have difficulties choosing or haven’t found what you are looking for?
Please, fill in the questionnaire on our site and we will select the most suitable solution to you.
Series-produced ERGA MG lifting magnets are given in the table. Our company specialists can design customized lifting beams based on ERGA MG permanent magnets according to the order requirements.
| Model | Dimension (LxWxH), mm | Weight, kg | Maximum lifting capacity, kg | Load parameters | ||
|---|---|---|---|---|---|---|
| Plate load | Round load | Minimum thickness, mm | Maximum length, mm | |||
| MG-100 | 62х96х72 | 3,5 | 100 | 50 | 15 | 1500 |
| MG-300 | 95х166х107 | 14 | 300 | 150 | 25 | 2000 |
| MG-600 | 116х216х117 | 20 | 600 | 300 | 30 | 2000 |
| MG-1000 | 145х266х145 | 40 | 1000 | 500 | 40 | 3000 |
| MG-1500 | 180х364х180 | 75 | 1500 | 750 | 55 | 3000 |
| MG-2000 | 180х364х180 | 75 | 2000 | 1000 | 55 | 3000 |
| MG-2500 | 224х418х243 | 105 | 2500 | 1250 | 60 | 3000 |
| MG-3000 | 224х418х243 | 105 | 3000 | 1500 | 60 | 3000 |
| MG-5000 | 320х520х248 | 250 | 5000 | - | 60 | 3000 |
Lifting capacity depends on many factors including magnetic susceptibility of material, rolled metal tthickness, air gap between the contacting surface and load, surface roughness and purity. Reference information necessary for calculation of actual capacity is given in the product manual.
